alproof
vacrlr_tray_pos
vtp
Trendsetter_400/800_Proofing
This parameter is obsolete after Spectrum firmware version 1.1. The vtp position is
same as VR roller home position.
Sets the number of mm the vacuum roller should move away from its home (index
slot) position in order to line up the suction cups tangental to the surface of
the cassette. This parameter was obsoleted in V1.00 and is no longer used.
uint32
128 (obsolete after version 1.00)
0 to 300 mm
removed in version 1.10. The newer firmware use the home position as the tray (pick up)
position.
cal